How To Change A Color In Paint

Download Article

Download Article

This wikiHow teaches you how to use Pigment's colour replacement feature on a Windows reckoner. Microsoft Paint can't supervene upon complex colors the way that Photoshop can, merely y'all can use the eraser tool to replace a simple color with some other color without touching the other colors in the project.

Steps

1. 1

   Open Start . Click the Windows logo in the bottom-left corner of the screen.

2. ii

   Open Pigment. Type in pigment, then click Paint in the Start carte du jour. The Paint window will open.

   • If yous see something called "Paint 3D", don't select it—Paint 3D is separate from Microsoft Paint.

   Advertisement

3. 3

   Open an image if necessary. While Paint'southward color replacement feature can't handle complex colors, y'all can open a simple Paint project or clip art to edit if need be:

   • Click File in the top-left corner of the Pigment window.
   • Click Open in the drop-down menu.
   • Go to the location of the prototype you lot desire to open.
   • Click the image.
   • Click Open.
   • If you aren't opening an existing file, create the Pigment project you want to employ before proceeding.

4. 4

   Select the eyedropper tool. Click the eyedropper-shaped icon in the "Tools" section at the peak of the Paint window.

5. 5

   Click the color you want to replace. This will assign the color to the "Color 1" section at the elevation of the Paint window.

   • You can zoom in to become a amend view of the color by clicking + in the bottom-right corner of the window.

6. 6

   Select the eyedropper tool again. Click its icon in the "Tools" section to do so.

   • Skip this pace if the color you desire to replace the get-go color with isn't on the canvass.

7. 7

   Right-click the color you want to utilize to replace the get-go color. This will add information technology to the "Color 2" box, signifying that the "Colour 1" box's color will be replaced with the "Color 2" box's color.

   • If y'all skipped the last step, you'll instead click the Color 2 box at the top of the page and then click the color you desire to use from the palette at the summit of the window.

8. 8

   Select the eraser tool. Click the pink, eraser-shaped icon in the "Tools" section.

9. 9

   Right-click and drag across the colour you lot want to replace. This will cause the "Colour 2" box's color to supersede the "Color 1" box's color without altering any of the other colors on the sail.

   • Practise not apply the left mouse push for this step. Doing so will cause the eraser tool to erase anything you elevate information technology across instead of simply erasing the color you selected as the ane to supersede.

   Advertizing

Add New Question

• Question

  I don't even become a yellow circumvolve! What else can I endeavour?

  

  If you lot're on Windows 7+ the circle doesn't appear, merely the cursor changes to a small square.

• Question

  How do I return the page to normal once I am on the black screen?

  

  On the height left corner, you will come across 2 arrows. Select the 1 that'southward bluish, only furthest to the left or press Ctrl-z.

• Question

  Information technology says to drag the mouse while holding right click. But I'm using a laptop, I tin't exercise that! What do I practice?

  

  If you have a ii-push touch on pad, utilise i hand to right click and one hand to drag.

• Question

  When I click the eraser tool with color 1 set to the colour I want removed, the little box doesn't plow the color (number 1 colour). What can I do?

  

  Wade Willson

  Community Answer

  The little box is not supposed to turn to color 1. It is supposed to plough to colour two.

• Question

  Is there any way to supercede all of a certain color with some other i?

  

  Employ the saucepan tool; information technology replaces all of a certain colour that's non blocked off.

• Question

  Following these instructions, the eraser seems to erase every colour indiscriminately. What am I missing?

  

  You are probably holding the left mouse button downward while erasing, rather than the correct mouse button.

• Question

  I couldn't replace the colors in MS Paint, though I followed the steps. What do I do?

  

  It depends on if you've closed and saved it before opening it support to do that. Brand sure to save and close, so check back.

• Question

  What exercise I do if right clicking doesn't supersede the color?

  

  This is likely happening because you're using a PNG or JPEG file, rather than a BMP. Copy and place your image in a make new paint window and effort the color replacement method in the new window.

• Question

  What do I practice if clicking the pixel when I try this only colors in that pixel when I click to select the color to be replaced?

  

  That probably means you didn't select the eyedropper first. 1) Left click on the eye dropper. Left click on the color you lot want to replace. That color should appear in the Color 1 box. 2) Change the Color 2 box by outset left clicking on the box and the either: a) left clicking on the colour in the color-prepare that you want; b) using the eyedropper to select a colour from your image. 3) Left click on the eraser. At present right click on the image and drag the mouse around while property downward the right mouse button. Everything that is Colour 1 in the paradigm should change to Color 2.

Ask a Question

200 characters left

Include your email address to become a bulletin when this question is answered.

Submit

Advertisement

• Make sure you lot're using the eyedropper to select the outset colour. Failing to practise so may cause the eraser to utilize your "Color ii" color to everything it touches.

Advertisement

• Sometimes, a colored outline will be left surrounding an object for which yous replaced the colour. You will have to get rid of this outline manually.

• These steps will only work for MS Paint versions 6.one and college.^[1]

Advertising

Almost This Article

Article Summary X

1. Click the eyedropper tool.
two. Click the color you want to replace.
iii. Click the eyedropper tool again.
iv. Correct-click the replacement color.
five. Click the eraser tool.
6. Right-click and drag the color yous want to supplant.

Did this summary assist you lot?

Thanks to all authors for creating a page that has been read 641,484 times.

Is this commodity up to date?

Source: https://www.wikihow.com/Use-Color-Replacement-in-MS-Paint

Posted by: taylorwarorinced44.blogspot.com

Share this post